FTA Satellite, Part 4: Installation

 Installation of a single satellite FTA system is a relatively easy task, provided that you done a little homework and have the right tools for the job. The tools needed are a magnetic level, compass, satellite finder, open end and socket wrenches, screwdrivers, and of course your FTA receiver, dish and mount, and coaxial cables.

Your first task once you decide what satellite you want is to determine the location for your dish. For most installations this will be on a roof. If you are installing on a roof, most dishes will come with a "J-pipe" mount that includes all the mounting hardware you need, but I would also recommend using some asphalt sealant between the roofing material and J-pipe to prevent water intrusion. You can also install your dish on a pipe set into concrete. A pole set in concrete should be a heavy weight metal water pipe, not the galvanized "top rail" for chain link fencing that I often recommend for mounting OTA antennas.

FTA Satellite, Part 3: The Equipment

In the third installment of our Free To Air (FTA) satellite series, we'll cover the equipment needed to set up a simple, one satellite system that will get you started. We'll assume that you are going to set up your system for Galaxy 19 at 97 degrees. While there is lots of programming on other satellites, Galaxy 19 has over 200 unencrypted channels available (although most are foreign language and/or religious) and it is the logical place to start.

While you can add a motor drive or use multiple LNBs to get more than one satellite, at this point we'll be focused on just a single satellite. For this, you need just 4 things: A dish, 30" or larger with mount, an "LNB" (a Low-Noise Block down converter), a receiver, and some coax cable. I would also suggest an inexpensive satellite finder to make setup much easier. 

Here's the low-down on all that you need:

FTA Satellite, Part 2: Is It For You?

FTA Satellite TV
Part 2

(Read part 1 here)

FTA satellite TV is not for everyone. But is FTA Satellite TV for you? That depends on a number of things.

Consider that you'll need to install a satellite dish at least 30" in diameter to get FTA Ku band programming - that's about 2x the size of the smallest (18") Dish Network or DirecTV dishes. Satellite dishes are covered by the FCC's OTARD regulations, which allow for the installation of satellite dishes up to 1 meter diameter (or any size in Alaska), in an area that you have "exclusive use" of. Basically, you can put a FTA dish anywhere you can put an antenna or DirecTV / Dish Network dish.

If you aren't allowed to have a satellite dish where you live, you can stop right here. Otherwise, read on to see if FTA satellite TV is something you may be interested in.

Using FTA Satellite To Get Free TV

Today, we are going to dabble a bit in the "black arts" of free TV. No, we aren't going to do anything illegal. It's all perfectly legal, the equipment is inexpensive, and the programming is FREE.

Let's get this out of the way first: it's not a replacement for pay TV. No HBO, ESPN, or Showtime here. No HGTV. But there is a lot of content that you would find in a basic pay TV package, and free over the air (OTA) broadcast TV can be found. You can also find some unencrypted premium content as well, albeit most of that is international (non-English) programming.

In this multi-part series of posts, we'll walk you through what free satellite TV is and what is not, what content is available, what it will cost you, and how to set up a simple single satellite system for about $100-$200.

Lets start at the beginning: the 1970's, the dawn of satellite TV.